Skip to content
#1 B2B Distribution Solution
Now offering free shipping on orders over $150!
Search

Grow Equipment

Commercial equipment for professional cultivation operations—Start. Develop. Scale up with confidence.

Utilize the tools below to size and configure grow equipment quantities, electrical loads, room layouts, and system requirements to support accurate project scoping and commercial ordering. Building for multiple rooms or facilities? Use the commercial request options below for design review, equipment sizing assistance, and project-level support.

Grow Equipment — Planning Tools & Configurators

Configure equipment quantities, validate electrical planning assumptions, and plan project ordering pathways. Use the menu below to open the tool you need.

Equipment Schedule Planners
Grow Room Configurators
View all Grow Equipment Tools (5)
Equipment Schedule Planners
Grow Room Configurators
Programs & Eligibility
Request a commercial equipment quote Equipment Sizing Assistance Talk to a Hydrotek Rep

Layout Planner

Benches & Multi-Tier Racks Room Configurator

Enter room dimensions, clearances, and working-space preferences to estimate benches/racks quantity and standard sizes that maximize usable canopy.

Room inputs

ft in
ft in

System selection

Tip: Use tighter clearances to model dense canopy layouts; use wider working clearances for higher service access.

Spacing rules

ft in
ft in
ft in
ft in

Special space requirement

ft in

Use for main corridor, drain trench access, or equipment/service clearance.

Disclaimer: Planning estimate based on simplified rectangular layouts. Hydrotek can validate final layouts and pricing as part of a commercial request.

Need a project quote?

Submit your room count, dimensions, and preferred system type. Our team will respond within 48 hours with layout guidance and project pricing options.

Submit Project Details

Helpful to include:

  • Facility location + project timeframe
  • # rooms and approximate dimensions
  • Target canopy / plant count (if known)
  • Preferred system type + desired working clearances

Enter inputs above and click “Calculate layout”.

Grow Lights Coverage & Power Calculators

Estimate fixture quantity, canopy coverage, and electrical load. For exact layouts, request a Hydrotek lighting design review.

1) Coverage & Fixture Quantity

Example: bench height + canopy midpoint height.
Racks typically reduce usable canopy due to posts, access lanes, and structural zones.
Coverage varies by mounting height, optics, overlap strategy, and target uniformity.
Advanced: PPF method (more accurate) (DLI reference: PPFD × hours × 3.6 ÷ 1000)
Use manufacturer spec sheet if known.
Accounts for spacing, reflectance, and room losses.
Typical DLI planning ranges (reference):
  • Propagation: ~10–20 mol/m²/day
  • Mother plants: ~20–35 mol/m²/day (cultivar + SOP dependent)
  • Vegetative: ~20–35 mol/m²/day
  • Flowering: ~30–45+ mol/m²/day (cultivar dependent)
Canopy area: —
Mounting height above canopy: —
Usable canopy factor: —
Fixture count (coverage method): —
Fixture count (PPF/PPFD method): —
Request Lighting Layout Review

2) Electrical Load & Amps

Estimate connected load and amperage for circuit/panel planning.

Fixture quantity used: —
Total connected load: —
Estimated amperage: —
Planning only. Final electrical design depends on circuits, drivers, and local code.
Get a Commercial Quote

Results

Share or export your estimates for internal review or for Hydrotek quoting.

Climate Control Calculators

Establish baseline sizing for dehumidification, ventilation, circulation, cooling load, and CO₂ supplementation. Use the results to plan equipment packages, compare options, and share a spec snapshot with your team.

Request Commercial Sizing Assistance Talk to a Hydrotek Specialist
These tools provide planning-level estimates for commercial projects. Final sizing should be validated against your operating setpoints, HVAC design, and facility constraints.
Total plants contributing to transpiration in this room/zone.
Average irrigation volume applied per plant per day.
Percent of applied water that exits as runoff (not evaporated/transpired).
Planning assumption: portion of net applied water that becomes water vapor.
If your HVAC removes moisture, reduce the load assigned to dehumidifiers.
Adds buffer capacity for peaks, door cycles, and operational variability.
CFM = (Volume × ACH) ÷ 60.
Planning allowance for static pressure / friction losses.
Planning allowance for carbon/HEPA filters.
Recirculation target: Volume × AT/min (then adjusted).
Lighting heat is typically the dominant load in sealed rooms.
Planning add-on for dehu heat (approximation).
Delivers the hourly dose within the ON window.

Irrigation BOM Calculators

Planning-level irrigation bill of materials for benches/tables, grow rooms, and water rooms. Use the results to spec consumables and core components, then validate final sizing against layout, pressure losses, and operating setpoints.

Guidance only. Final pipe sizing, pump selection, and pressure regulation should be confirmed using exact zoning, emitter curves, filtration requirements, and TDH calculations.
Use 1 for single tables. For multi-tier racks, enter total levels.
Used to estimate plant count per table level.
Used for applied volume estimate (not for instantaneous flow sizing).
Planning count of laterals across table width.
Adds allowance for cuts, routing, and spares.
Used to estimate per-zone flow and valve counts.
Planning length; refine after routing.
Rule-of-thumb only; confirm with friction loss.
Typically equals your facility simultaneous irrigation flow.
Planning allowance for pipe + fittings + filters.
Run Calculate on the tabs you need first, then build the consolidated BOM. This aggregates duplicate items (same item + UOM) across the computed tabs.

Nutrients Delivery Systems Configurator

Configure an inline injection or batch-mix nutrient delivery system based on irrigation flow, number of zones, dosing channels, and water-room constraints. Use the results to build a planning BOM and align the right equipment architecture for your facility.

Planning-level guidance only. Final selection must be validated against water chemistry, pressure losses, irrigation scheduling (simultaneous zones), injector pump curves, and local plumbing codes/backflow requirements.
Typical flow when one irrigation zone/room loop is running.
Used to estimate peak injection flow (critical for sizing).
Optional. If provided, this overrides Flow per zone × Simultaneous zones.
City/well feed pressure before filtration/PRV losses.
Typical drip operating range (varies by emitter/regulators).
Used to estimate stock tank consumption and tank sizing.
Choose the approach you prefer; calculator will flag fit/risk based on inputs.
Helps determine filtration requirements and control recommendations.
Fine filtration upstream helps protect injectors/valves and reduce clogging risk.
Typical: 2-part (A/B), plus optional CalMag, additives, pH control.
A 1:100 ratio means 1 part concentrate per 100 parts water.
Common dosing bands: 50–500. Higher X = weaker injection per channel.
Used when Dose format is percent. Example: 1.0% per channel.
EC/pH targets typically require a controller, sensors, and metered dosing.
Planning: size each stock tank to cover daily usage × autonomy days.
Adds buffer for recipe swings, staffing, and refill lag.
High-frequency and recirc setups generally benefit from tighter control.
Helps bias toward proportional vs metered dosing architecture.
Strongly recommended for metered dosing and troubleshooting.

Browse Grow Equipment Categories

COMMERCIAL EQUIPMENT CAPEX PROGRAMS

Buildout, Expansion & Retrofit Assistance

Hydrotek supports commercial cultivation teams, contractors, and consultants with equipment selection, project pricing, and freight-ready delivery for new facility buildouts and upgrades.

  • Equipment sizing & specification support aligned to rooms, canopy, and electrical service
  • Direct-from-factory pricing on select brands and equipment categories
  • Bundle discounts across equipment types (lighting, climate, irrigation, benches)
  • Group-buy eligibility for cost-effective sourcing on multi-room or multi-site deployments
  • Staged releases, palletized freight, and jobsite / 3PL coordination
Submit Project Details Request Wholesale Quote Talk to a Hydrotek Rep

Tip: You don’t need final SKUs. Share your scope and timeline—our commercial team will respond within 48 hours.

What to include

  • Facility location + project timeframe
  • # rooms and approximate dimensions
  • Target canopy or plant count
  • Voltage / phase available (if known)
  • Desired equipment categories

Common requests

  • CAPEX budgeting and equipment bundles
  • Alternates / substitutions to hit lead times
  • Standardization across multiple rooms or sites
  • Freight planning and staged deliveries
WORLD-CLASS SUPPLIER OF PROFESSIONAL CULTIVATION EQUIPMENT

WORLD-CLASS SUPPLIER OF PROFESSIONAL CULTIVATION EQUIPMENT

Hydrotek is a specialized supplier of commercial-grade grow equipment supporting new facility buildouts, expansions, retrofits, and system upgrades across controlled-environment agriculture (CEA). We work alongside operators, consultants, and engineering teams to ensure equipment selections are technically correct, cost-efficient, and aligned with long-term operational goals.

Our role goes beyond distribution. Hydrotek functions as a project-support partner, helping customers move from concept and scope to procurement and deployment with confidence.

Buildout, retrofit & expansion support

Equipment sizing to meet your facility requirements

Single point of contact for project assistance

Dedicated rep for project timelines & procurement

Commercial logistics & fulfillment

Freight-optimization & jobsite delivery coordination

Direct-from-factory pricing
Bundled equipment discounts
Group-buy programs

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare